VN / VP / VG

LED Brake Light for VP SS Holden Commodore Rear Spoiler (395mm Length) (Red)   *** NOTE: This tail light can fit numerous other spoilers and lights. See pictures for measurements ***   If you're looking for a LED Rear Brake Light for VP SS Holden Commodore Spoiler then this is the one for you. Tough look, plus tough construction, give your car that aftermarket look and style.   LED Brake Light for VP SS Holden Commodore Rear Spoiler (395mm Length) (Fits Many Other Models) NOTE: Please check the above pictures for the measurements of this light to make sure it is the same as the one you need (Contact us with a photo and measurements of your light if you're unsure) Can be used on numerous other spoilers Red lens and lights up red Measures approx: Length 395mm Ready to fit Super strong build quality Limited Stock - Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Infill Panels for VG / VP / VR / VS Holden Commodore Ute Tray Tub   If you're looking for 100% Australian made Infill Panels for VG / VP / VR / VS Holden Commodore Ute Tray / Tub then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Infill Panels for VG / VP / VR / VS Holden Commodore Ute Tray Tub Polish off your ute rear tub with these sleek looking infill panels! Covers up the whole sides & rear where all the tie down points are for a smooth look on the rear tub Supplied as 2x side pieces and 1x rear piece (Also available separately - Contact us for this) 100% Australian made Each piece has duvets in them where you drill and bolt them to the car using the original bolts off car This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Front Grill for VP Holden Commodore - Single Slot   If you're looking for a Front Grill for VP Holden Commodore then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Front Grill for VP Holden Commodore - Single Slot Replace the ugly standard grill with this single slot grill! Fits ONLY onto a VP Commodore with a Senator or GTS type front bar  Straight swap over 100% Australian made This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Front Bumper Bar Lip for VP Holden Commodore - SS Style   If you're looking for 100% Australian made Front Bumper Bar Lip for VP Holden Commodore in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Front Bumper Bar Lip for VP Holden Commodore - SS Style Polish off the front end of your VP Commodore with this sleek looking front bumper bar lip! Meant to be attached to the bottom of the standard front bumper bar with urethane & small screws  100% Australian made NOTE: VN & VP SS style front lips are different between the two models and are NOT interchangeable (To see front lip for VN models, see other listing) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Guard Flare Ticks for VN / VG / VP Holden Commodore - VN Group A Style   If you're looking for Guard Flare Ticks for VN / VG / VP Holden Commodore in VN Group A Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.    Guard Flare Ticks for VN / VG / VP Holden Commodore - VN Group A StyleAdd that extra touch to the guards on your Commodore with these sleek looking guard flare ticks! 100% Australian made Supplied as a pair for the front wheel arches (Also available separately)  Meant to be stuck to the guards with urethane This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Twin Vent Bonnet Scoop - Universal Design to Fit Most Bonnets If you're looking for a Twin Vent Bonnet Scoop to Fit Most Bonnets then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Twin Vent Bonnet Scoop - Universal Design to Fit Most Bonnets Give your car's front end a whole new look with this TOUGH looking bonnet scoop! 100% Australian made Can be made to fit pretty much any model bonnet with some modification - Can use Sikaflex/Urethane to fill any small gaps (We've had customers fit these on Hilux's, VS Commodores and many more) Length: 70cm, Width: 67cm, Vent width: 55cm, Height: Approx 6cm Meant to be attached with urethane & small screws  This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Lower Lip Bodykit for VN / VP Holden Commodore Sedan - SS Style   *** NOTE: Please choose correct option above as to what model car you have; VN or VP (As the front & rear lips are different between the two models and are NOT interchangeable) ***     This Lip Bodykit includes: Front Lower Lip Rear Lower Lip (One piece lip) Side Skirts (Pair - One piece skirts)   If you're looking for a 100% Australian made Lower Lip Bodykit for VN / VP Holden Commodore Sedan in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Lower Lip Bodykit for VN / VP Holden Commodore Sedan - SS Style Give your VN or VP a whole new sleek look with this lower lip bodykit! NOTE: Please choose correct option above as to what model car you have; VN or VP (As the front & rear lips are different between the two models and are NOT interchangable)  Front and rear skirts attach to the bottom of your original bumpers - Use urethane and small screws to attach (Attach side skirts like this also) 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Side Skirts for VN / VP / VR / VS Holden Commodore Sedan   If you're looking for Side Skirts for VN / VP / VR / VS Holden Commodore Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.    Side Skirts for VN / VP / VR / VS Holden Commodore Sedan Give your Commodore a new look with these tough looking side skirts! 100% Australian made Supplied as a pair (Can also be bought singularly - Contact us for this) Each side skirt is a one piece design These skirts do not have an indentation for a badge Meant to be attached with urethane & small screws  This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet Scoop for VN / VP Holden Commodore - 4 Inch Reverse Cowl If you're looking for a Bonnet Scoop for VN / VP Holden Commodore then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Bonnet Scoop for VN / VP Holden Commodore - 4 Inch Reverse Cowl Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made Shaped to exact same shape as bonnet - Covers full length of bonnet Will fit VQ Statesman however you will need to trim back front of scoop where grill is Scoop measures approx: 1380cm long x 540 wide (inside edge) not including the flange Meant to be attached to bonnet with urethane and small screws This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style   If you're looking for a Bonnet Scoop for VN / VG / VP Holden Commodore in VN Group A Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.    Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made This scoop is fully enclosed (Does not have any vents/openings) Can fit many different style bonnets with the same curve Has inserts in flange on underneath of scoop for mounting - Recommended to use urethane for an additional strong bond also This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Rear Boot Spoiler for VN / VP Holden Commodore Sedan - VN SS Style - 3 Piece   If you're looking for a Rear Boot Spoiler for VN / VP Holden Commodore Sedan in VN SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.    Rear Boot Spoiler for VN / VP Holden Commodore Sedan - VN SS Style - 3 Piece Give your Commodore rear end a whole new look with this tough looking boot spoiler! Fits all VN / VP Sedans & also VQ Statesman Sedan 3 piece spoiler - Outer 2 parts are to be attached to outer quarter panels and centre piece to boot All pieces have threaded inserts in them for mounting & they use the same mounting holes from the genuine VN SS spoiler 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!     Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Oxygen Sensor for VP / VR / VS Holden Commodore 5.0L V8   If you're looking for aftermarket parts and accessories for your ride then you've come to the right place. Whether you want to freshen up your ride or your old gear is worn out, this quality part will get the job done. Give your car that aftermarket look and style. Oxygen Sensor for VP / VR / VS Holden Commodore 5.0L V8 Brand new aftermarket replacement part Direct Replacement 2 Connector Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Shipping Australia Wide Make Model Series Year Engine Note Location Holden Commodore VP 1991/11-1993/07 5.0L From Eng VU612774   Pre-Cat Holden Commodore VR 1993/06-1995/04 5.0L Pre-Cat Holden Commodore VS May-95 3.8L Up To VIN L823094, not for 4-Wires Pre-Cat Holden Commodore VS 1995/05-1997/08 5.0L Pre-Cat Holden Commodore VT 1997/09-2000/08 3.8L Pre-Cat Holden Commodore VU 2001/01-2002/08 3.8L Pre-Cat Holden Commodore VX 2000/09-2002/08 3.8L Pre-Cat Holden Commodore VY 2002/09-2002/12 3.8L Pre-Cat Holden Statesman VQ 1990/03-1993/05 5.0L From Eng VU611187   Pre-Cat Holden Statesman VR 1993/06-1995/04 5.0L Pre-Cat Holden Statesman VS May-95 3.8L Up To VIN L823094, not for 4-Wires Pre-Cat Holden Statesman VS 1995/05-1999/05 5.0L Pre-Cat Holden Statesman WH 1999/06-2003/03 3.8L Pre-Cat    

Side Skirts for VG / VP / VR / VS Holden Commodore Ute   If you're looking for 100% Australian made Side Skirts for VG/VP/VR/VS Holden Commodore Ute then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Side Skirts for VG / VP / VR / VS Holden Commodore Ute Give your Commodore a new look with these tough looking side skirts! Supplied as a pair (Also available separately - Contact us for this) One piece side skirts Australian made Meant to be attached with urethane & small screws  This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Add to Cart Now  

Front Bumper Bar Lip for VN Holden Commodore - SS Style   If you're looking for 100% Australian made Front Bumper Bar Lip for VN Holden Commodore in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Front Bumper Bar Lip for VN Holden Commodore - SS Style Polish off the front end of your VN Commodore with this sleek looking front bumper bar lip! Meant to be attached to the bottom of the standard front bumper bar with urethane & small screws  100% Australian made NOTE: VN & VP SS style front lips are different between the two models and are NOT interchangeable (To see front lip for VP models, see other listing) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Rear Bumper Bar Lip for VN Holden Commodore Sedan - SS Style   If you're looking for 100% Australian made Rear Bumper Bar Lip for VN Holden Commodore Sedan in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.    Rear Bumper Bar Lip for VN Holden Commodore Sedan - SS Style Polish off the rear end of your VN Commodore with this sleek looking rear bumper bar lip! 100% Australian made Meant to be attached to the bottom of the standard rear bumper bar with urethane & small screws 1 piece design NOTE: VN & VP SS style rear lips are different between the two models and are NOT interchangeable (To see rear lip for VP models, see other listing) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Bonnet Scoop for VN / VP / VR / VS Holden Commodore with Front Vent - Group A Style   If you're looking for 100% Australian made Bonnet Scoop for VN / VP / VR / VS Holden Commodore in Group A Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Bonnet Scoop for VN / VP / VR / VS Holden Commodore with Front Vent - Group A Style Give your car a new look with this super sleek bonnet scoop! 100% Australian made Approx measurements: 720mm long x 550mm wide (at rear) x 390mm wide (at front) x 65mm high (Approx only) Meant to be attached to bonnet with urethane and small screws screwed from underneath into mounting tabs on scoop This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Front Grill for VN Holden Commodore - Single Slot 3800 Style   If you're looking for a Front Grill for VN Holden Commodore in Single Slot 3800 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Front Grill for VN Holden Commodore - Single Slot 3800 Style Replace the ugly standard grill with this single slot grill! Also known as a Letterbox grill or '89 Style' grill Straight swap over - Fits standard bumper bars and the Aero style front bar 100% Australian made This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

PASSENGER Side Quarter Window Panel Surround for VG / VP / VR / VS Holden Commodore Ute   If you're looking for an Australian made PASSENGER Side Quarter Window Panel Surround for VG / VP / VR / VS Holden Commodore Ute then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   PASSENGER Side Quarter Window Panel Surround for VG / VP / VR / VS Holden Commodore Ute If you've broken your quarter window panel then this is the part for you PASSENGER side quarter panel surround (Driver side also available - see other listing) Australian made Can be attached with urethane & small screws  This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Add to Cart Now  

DRIVER Side Quarter Window Panel Surround for VG / VP / VR / VS Holden Commodore Ute   If you're looking for an Australian made DRIVER Side Quarter Window Panel Surround for VG / VP / VR / VS Holden Commodore Ute then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   DRIVER Side Quarter Window Panel Surround for VG / VP / VR / VS Holden Commodore Ute If you've broken your quarter window panel then this is the part for you DRIVER side quarter panel surround (Passenger side also available - see other listing) Australian made Can be attached with urethane & small screws  This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Add to Cart Now  

Rear Boot Bobtail Spoiler for VN / VP Holden Commodore Sedan & VQ Statesman - VN SV89 Style   If you're looking for 100% Australian made Rear Boot Bobtail Spoiler for VN / VP Holden Commodore Sedan & VQ Statesman in VN SV89 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Rear Boot Bobtail Spoiler for VN / VP Holden Commodore Sedan & VQ Statesman - VN SV89 Style Give the rear end of your Commodore or Statesman a whole new look with this sleek bobtail spoiler! Fits VN / VP Commodore Sedan and VQ Statesman models 100% Australian made Has 4x threaded inserts fixed into spoiler underneath for attachment to boot This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Boot Spoiler for VN / VP Holden Commodore - VP SS Style   If you're looking for 100% Australian made Boot Spoiler for VN / VP Holden Commodore in VP SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Boot Spoiler for VN / VP Holden Commodore - VP SS Style Give your Commodore's rear end a whole new look with this sleek boot spoiler! 100% Australian made Fits VN / VP and VQ Statesman sedans Supplied with LED brake light 3 leg spoiler - 1 leg in centre and 2 on each outer side of boot Has metal encased legs in each leg of spoiler - You can drill from underneath into this steel for mounting points for bolts (Each leg has a flat bottom) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!  

Fuel Injectors x 6 for VL / VG / VN / VP / VR / VS / VT / VU / VX / VY Holden Commodore / VQ to WK Statesman 3.8L   If you're looking for aftermarket parts and accessories for your ride then you've come to the right place. Whether you want to freshen up your ride or your old gear is worn out, this quality part will get the job done. Give your car that aftermarket look and style. Fuel Injectors x 6 for VL / VG / VN / VP / VR / VS / VT / VU / VX / VY Holden Commodore / VQ to WK Statesman 3.8L Brand new aftermarket replacement part Direct Replacement Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Shipping Australia Wide Note: Please see table below for details & all models this item fits   Make Model Series Year Engine Engine Code Body Style Holden Commodore VG 1988-1991 3.8L L27 Ute Holden Commodore VG 1988-1991 5.0L VU Ute Holden Commodore VL 1986-1987 4.9L GMH 308 Sedan Holden Commodore VN 1988-1991 3.8L LN3 Sedan Holden Commodore VN 1988-1991 3.8L LN3 Wagon Holden Commodore VN 1988-1991 5.0L GMH 304 (Black) Sedan Holden Commodore VN 1988-1991 5.0L GMH 308 Wagon Holden Commodore VP 1991-1993 3.8L L27 Sedan Holden Commodore VP 1991-1993 3.8L L27 Wagon Holden Commodore VP 1991-1993 3.8L L27,LN3 Ute Holden Commodore VP 1991-1993 5.0L GMH 308 Sedan Holden Commodore VP 1991-1993 5.0L GMH 308 Ute Holden Commodore VP 1991-1993 5.0L GMH 308 Wagon Holden Commodore VR 1993-1995 3.8L L27 Sedan Holden Commodore VR 1993-1995 3.8L L27 Ute Holden Commodore VR 1993-1995 3.8L L27 Wagon Holden Commodore VR 1993-1995 5.0L 50LB9 Sedan Holden Commodore VR 1993-1995 5.0L 50LB9 Ute Holden Commodore VR 1993-1995 5.0L 50LB9 Wagon Holden Commodore VS 1995-1997 3.8L L36(231CUV6) Sedan Holden Commodore VS 1995-1997 3.8L L36(231CUV6) Wagon Holden Commodore VS 1995-1997 3.8L L67 Sedan Holden Commodore VS 1995-1997 5.0L 50LB9 Sedan Holden Commodore VS 1995-1997 5.0L 50LB9 Wagon Holden Commodore VS 1995-2000 3.8L L36(231CUV6) Ute Holden Commodore VS 1995-2000 5.0L 50LB9 Ute Holden Commodore VT 1997-2000 3.8L L36(231CUV6) Sedan Holden Commodore VT 1997-2000 3.8L L67 Sedan Holden Commodore VT 1997-2000 5.0L 50LB9 Sedan Holden Commodore VT 1997-2002 3.8L L36(231CUV6) Wagon Holden Commodore VT 1997-2002 5.0L 50LB9 Wagon Holden Commodore VT 1999-2000 5.7L LS1 Sedan Holden Commodore VT 1999-2000 5.7L LS1 Wagon Holden Commodore VU 2000-2002 3.8L L36(231CUV6) Ute Holden Commodore VU 2000-2002 5.7L LS1 Ute Holden Commodore VX 2000-2002 3.8L L36(231CUV6) Sedan Holden Commodore VX 2000-2002 3.8L L36(231CUV6) Wagon Holden Commodore VX 2000-2002 3.8L L67 Sedan Holden Commodore VX 2000-2002 5.7L LS1 Sedan Holden Commodore VX 2000-2002 5.7L LS1 Wagon Holden Commodore VY 2002-2003 5.7L LS1 Sedan Holden Commodore VY 2002-2003 5.7L LS1 Wagon Holden Commodore VY 2002-2004 3.8L L67 Sedan Holden Commodore VY 2002-2004 3.8L L67 Ute Holden Commodore VY 2002-2004 3.8L LN3 Sedan Holden Commodore VY 2002-2004 3.8L LN3 Ute Holden Commodore VY 2002-2004 3.8L LN3 Wagon Holden Commodore VY 2002-2004 5.7L LS1 Ute Holden Statesman VQ 1990-1993 3.8L L27 Sedan Holden Statesman VQ 1990-1994 5.0L GMH 308 (Red) Sedan Holden Statesman VR 1994-1995 3.8L L27 Sedan Holden Statesman VR 1994-1995 5.0L 50LB9 Sedan Holden Statesman VS 1995-1998 3.8L L36(231CUV6),LN3 Sedan Holden Statesman VS 1995-1999 5.0L 50LB9 Sedan Holden Statesman VS 1996-1999 3.8L L67 Sedan Holden Statesman WH 1999-2003 3.8L L36(231CUV6) Sedan Holden Statesman WH 1999-2003 5.7L LS1 Sedan Holden Statesman WH 2001-2003 3.8L L67 Sedan Holden Statesman WK 2003-2004 3.8L L36(231CUV6) Sedan Holden Statesman WK 2003-2004 3.8L L67 Sedan Holden Statesman WK 2003-2004 5.7L LS1 Sedan    

Tailgate Numberplate Surround Garnish / Insert for VG / VP / VR / VS Holden Commodore Ute   If you're looking for a 100% Australian made Tailgate Numberplate Surround Garnish / Insert for VG / VP / VR / VS Holden Commodore Ute then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style.   Tailgate Numberplate Surround Garnish / Insert for VG / VP / VR / VS Holden Commodore Ute Polish off your Commodore utes rear end with this numberplate holder panel! 100% Australian made Meant to be attached to car with urethane Has markings for exactly where to cut out numberplate light holes This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!   Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!