Subaru – Page 15 – Spoilers and Bodykits

Rear Bumper Bar Diffuser for Toyota 86 / Subaru BRZ (2013 - 2016 Models) - Spoilers and Bodykits Australia

Rear Bumper Bar Diffuser for Toyota 86 / Subaru BRZ (2013 - 2016 Models)

$299.00 $335.00

Rear Diffuser for Toyota 86 / Subaru BRZ (2013 - 2016 Models) If you're looking for a Rear Diffuser for Toyota 86 / Subaru BRZ then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Diffuser for Toyota 86 / Subaru BRZ (2013 - 2016 Models) Super tough high quality Polyurethane construction Flat matt black in colour (Can be painted or left as is) Meant to be attached to the base of the original rear bumper Supplied with screws for fitment (You will need to drill holes to fit it) (Not supplied with instructions) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-18% sale

Rear Boot Wing Spoiler for Subaru WRX Impreza GC8 - 22B Style - Adjustable (1993 - 2000)-Spoilers and Bodykits Australia

Rear Boot Wing Spoiler for Subaru WRX Impreza GC8 - 22B Style - Adjustable (1993 - 2000)

$899.00 $1,085.00

Rear Boot Wing Spoiler for Subaru WRX Impreza GC8 - 22B Style- Adjustable (1993 - 2000) If you're after an Australian made Rear Boot Wing Spoiler for Subaru WRX Impreza GC8 in 22B Style, this is the perfect choice. Designed with a tough, durable construction, it not only enhances protection but also gives your car a bold aftermarket look and style. Rear Boot Wing Spoiler for Subaru WRX Impreza GC8 - 22B Style - Adjustable (1993 - 2000) Give your WRX a whole new look with this TOUGH looking boot spoiler 100% Australian made Fits 1993 - 2000 2-Door & 4-Door Subaru WRX Impreza GC8 models Adjustable top wing Includes LED brake light Has threaded insert bolts that are moulded into the base of the spoiler for mounting This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart Now

-25% sale

Weather Shields for Subaru XV SUV Wagon G4-X (2011 - 2017 Models) - Spoilers and Bodykits Australia

Weather Shields for Subaru XV SUV Wagon G4-X (2011 - 2017 Models)

$117.00 $155.00

Weather Shields for Subaru XV SUV Wagon G4-X (2011 - 2017 Models) *** NOTE: If the year model of your car is made in the beginning or ending year as what is listed for this model, then contact us BEFORE purchasing, as your car model may have changed during that year which may make these not fit (We need to know exact month & year of build date) *** If you're looking for a set of Weather Shields for Subaru XV SUV Wagon G4-X then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Weather Shields for Subaru XV SUV Wagon G4-X (2011 - 2017 Models) Supplied as a set of 4 Fits 2.0i / Special Edition / 2.0i-L / 2.0i-S / G4X models High quality translucent black perspex plastic (These are NOT solid black in colour) Darkly tinted black yet extremely easy to see through Highly resistant to cracking and discolouring in the sunlight Ready to fit - Comes with 3M double sided tape on back of weather shields for easy installation Supplied with basic installation instructions Heavy duty UV resistant Reduces harsh sunlight and wind noise Minimises heat inside car when parked Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-9% sale

Side Skirts for Subaru WRX STI (2015 - 2017 Models)

$489.00 $535.00

Side Skirts for Subaru WRX STI (2015 - 2017 Models) If you're looking for some Side Skirts for Subaru WRX STI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Side Skirts for Subaru WRX STI (2015 - 2017 Models) These side skirts attach to the bottom of the standard skirts (Will fit 2008 - 2014 models) Supplied as a pair Super tough Poly-Urethane construction Matt black in colour This part can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-9% sale

Rear Bumper Bar Pods for Subaru WRX STI (2015 - 2017 Models)

$279.00 $305.00

Rear Pods for Subaru WRX STI (2015 - 2017 Models) If you're looking for Rear Pods for Subaru WRX STI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Pods for Subaru WRX STI (2015 - 2017 Models) These rear pods attach to the bottom of your stock rear bumper Supplied as a pair Super tough Poly-Urethane construction Matt black in colour This part can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-12% sale

Front Lip for Subaru WRX STI (2015 - 2017 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru WRX STI (2015 - 2017 Models)

$349.00 $395.00

Front Lip for Subaru WRX STI (2015 - 2017 Models) If you're looking for a Front Lip for Subaru WRX STI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Subaru WRX STI (2015 - 2017 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour This part can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-9% sale

Rear Bumper Bar Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models)

$279.00 $305.00

Rear Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models) If you're looking for a pair of Rear Pods for Subaru BRZ / Toyota 86 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models) These rear pods attach to the bottom of your standard rear bumper bar Supplied as a pair Super tough Poly-Urethane construction Matt black in colour These can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

Out of Stock -9% sale

Front Lip for Subaru BRZ - STI Style (2013 - 2016 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru BRZ - STI Style (2013 - 2016 Models)

$389.00 $425.00

Front Lip for Subaru BRZ - STI Style (2013 - 2016 Models) If you're looking for a Front Lip for Subaru BRZ in STI Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru BRZ - STI Style (2013 - 2016 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-6% sale

Side Skirts for Subaru WRX STI (2008 - 2014 Models) - Spoilers and Bodykits Australia

Side Skirts for Subaru WRX STI (2008 - 2014 Models)

$479.00 $505.00

Side Skirts for Subaru WRX STI (2008 - 2014 Models) If you're looking for Side Skirts for Subaru WRX STI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Side Skirts for Subaru WRX STI (2008 - 2014 Models) These side skirts attach to the bottom of your stock side bumper Supplied as a pair Super tough Poly-Urethane construction Matt black in colour These can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-12% sale

Front Lip for Subaru WRX Impreza STI (2008 - 2010 Models)

$349.00 $395.00

Front Lip for Subaru WRX Impreza STI (2008 - 2010 Models) If you're looking for a Front Lip for Subaru WRX Impreza STI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Subaru WRX Impreza STI (2008 - 2010 Models) This front lip attaches to the bottom of your stock front bumper bar Fits sedan & hatch models Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-15% sale

Front Lip for Subaru WRX STI Hawkeye (2006 - 2007 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru WRX STI Hawkeye (2006 - 2007 Models)

$339.00 $395.00

Front Lip for Subaru WRX STI Hawkeye (2006 - 2007 Models) If you're looking for a Front Lip for Subaru WRX STI Hawkeye then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru WRX STI Hawkeye (2006 - 2007 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-11% sale

Front Lip for Subaru WRX STI Hawkeye (2006 - 2007 Models)

$319.00 $355.00

Front Lip for Subaru WRX STI Hawkeye (2006 - 2007 Models) If you're looking for a Front Lip for Subaru WRX STI Hawkeye then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Subaru WRX STI Hawkeye (2006 - 2007 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-9% sale

Front Lip for Subaru Liberty - STI Style (2003 - 2006 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru Liberty - STI Style (2003 - 2006 Models)

$369.00 $405.00

Front Lip for Subaru Liberty - STI Style (2003 - 2006 Models) If you're looking for a Front Lip for Subaru Liberty in STI Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru Liberty - STI Style (2003 - 2006 Models) Fits 2003 - 2006: Subaru Liberty, JDM / Euro Bumper only This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-7% sale

Front Lip for Subaru WRX Peanut Eye - STI Style (2003 - 2005 Models)

$379.00 $405.00

Front Lip for Subaru WRX Peanut Eye - STI Style (2003 - 2005 Models) If you're looking for a Front Lip for Subaru WRX Peanut Eye then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru WRX Peanut Eye - STI Style (2003 - 2005 Models) This front lip attaches to the bottom of your stock front bumper bar Fits 2003 - 2005: WRX, STI, RS & Impreza Models Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-7% sale

Front Lip for Subaru WRX Bugeye - STI Style (2001 - 2002 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru WRX Bugeye - STI Style (2001 - 2002 Models)

$379.00 $405.00

Front Lip for Subaru WRX Bugeye - STI Style (2001 - 2002 Models) If you're looking for a Front Lip for Subaru WRX Bugeye then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru WRX Bugeye - STI Style (2001 - 2002 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-15% sale

Rear Bumper Bar Diffuser for Subaru Impreza WRX STI Sedan (2001 - 2005 Models)

$399.00 $465.00

Rear Bumper Bar Diffuser for Subaru Impreza WRX STI Sedan (2001 - 2005 Models) If you're looking for a 100% Australian made Rear Bumper Bar Diffuser for Subaru Impreza WRX STI Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Diffuser for Subaru Impreza WRX STI Sedan (2001 - 2005 Models) Give your Subaru a whole new look with this TOUGH looking rear diffuser! 100% Australian made This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

13 14 15

Huge Range of Awesome Gear

Shipping Aus-Wide

Easy 30 Day Returns

Awesome Customer Service

Ph: 1300 362 376

Mon-Fri (9am-5pm)

Email: sales@spoilersandbodykits.com.au

COLLECTIONS Roof Spoilers Weather Shields Bonnet Scoops Head Light Eyebrows All Lights Large Boot Spoilers Front Grills Bonnet Protectors Flares Bonnets Vents

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook