Rear Bumper Lips

If you're looking for a rear bumper bar lip for your vehicle then you've come to the right place. Spoilers And Bodykits has a large range of add on rear bumper bar lips to pump out the look of your vehicle and really give it the look you're after. From Ford, Holden, Mitsubishi, Nissan, Toyota and many more, we've got you covered, take a look at the full range below!

Read

-13% sale

Rear Bumper Bar Outer Pods for Nissan 350Z (Pair) (2002 - 2009 Models) - Spoilers and Bodykits Australia

Rear Bumper Bar Outer Pods for Nissan 350Z (Pair) (2002 - 2009 Models)

$319.00 $365.00

Rear Bumper Bar Outer Pods for Nissan 350Z (2002 - 2009 Models) If you're looking for Rear Bumper Bar Outer Pods for Nissan 350Z then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Outer Pods for Nissan 350Z (2002 - 2009 Models) Give the rear end of your 350Z a whole new look with these sleek rear bumper pods! 100% Australian made Supplied as a pair (Left & Right) Meant to be attached to the bottom outer of the standard rear bumper bar (Can use urethane glue etc) Custom designed to suit this model Quality fibreglass construction Super strong build quality This product is made to order - Please see above for approx build time Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-11% sale

Rear Bumper Bar Diffuser for Honda Civic Sedan FD 8th Gen (2006 - 2012 Models) - Spoilers and Bodykits Australia

Rear Bumper Bar Diffuser for Honda Civic Sedan FD 8th Gen (2006 - 2012 Models)

$397.00 $445.00

Rear Diffuser for Honda Civic Sedan FD 8th Gen (2006 - 2012 Models) If you're looking for a Rear Diffuser for Honda Civic Sedan FD 8th Gen then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Diffuser for Honda Civic Sedan FD 8th Gen (2006 - 2012 Models) Give the rear end of your Civic a whole new look with this super TOUGH looking rear diffuser! Fits the factory bumper on: Civic sedan 2006-2012 - VTi / VTi-L / Sport / Limited Edition / Hybrid / 40th Anniversary Tough injection plastic construction High quality smooth satin black finish Supplied with fittings and brake light No need to paint - Can be installed as is - Save time & money over preparing a fibreglass one (But you can paint it if you want it to match your cars colour) Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-13% sale

Rear Bumper Bar Skirt for AU Ford Falcon Ute - Tickford Style (09/1998 - 09/2002 Models)

$519.00 $595.00

Rear Bumper Bar Skirt for AU Ford Falcon Ute - Tickford Style (09/1998 - 09/2002 Models) If you're looking for 100% Australian made Rear Skirt for AU Ford Falcon Ute - Tickford Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Skirt for AU Ford Falcon Ute - Tickford Style (09/1998 - 09/2002 Models) Pump out the rear end of your AU Falcon ute with this super TOUGH looking rear skirt lip! 100% Australian made Meant to be attached to the bottom of standard rear bar using urethane & small screws This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-26% sale

Rear Bumper Bar Lip for VR VS Holden Commodore Sedan - SS Style (3-Piece) - Spoilers And Bodykits Australia

Rear Bumper Bar Lip for VR / VS Holden Commodore Sedan - SS Style (3-Piece)

$399.00 $535.00

Rear Bumper Bar Lip for VR / VS Holden Commodore Sedan - SS Style (3-Piece) If you're looking for a 100% Australian made Rear Bumper Bar Lip for VR / VS Holden Commodore Sedan - SS Style (3-Piece) then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Lip for VR / VS Holden Commodore Sedan - SS Style (3-Piece) Give your Commodore a whole new look with this TOUGH looking rear bumper bar lip! 100% Australian made 3-piece lip as per original (1-piece lip also available - See other listing for this) Meant to be attached with urethane & small screws to the bottom of the standard rear bumper bar This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

-20% sale

Rear Bumper Bar Lip for EF EL XR Ford Falcon Sedan - EF Tickford Style - Spoilers And Bodykits Australia

Rear Bumper Bar Lip for EF / EL XR Ford Falcon Sedan - EF Tickford Style

$449.00 $555.00

Rear Bumper Bar Lip for EF / EL XR Ford Falcon Sedan - EF Tickford Style If you're looking for 100% Australian made Rear Bumper Bar Lip for EF / EL XR Ford Falcon Sedan in EF Tickford Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Lip for EF / EL XR Ford Falcon Sedan - EF Tickford Style Give the rear end of your Falcon a whole new look with this TOUGH looking rear skirt lip! 100% Australian made Meant to be attached with urethane & small screws to the bottom of the standard rear bumper bar This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-15% sale

Rear Bumper Bar Lip for VP Holden Commodore Sedan - SS Style

$399.00 $465.00

Rear Bumper Bar Lip for VP Holden Commodore Sedan - SS Style If you're looking for 100% Australian made Rear Lip for VP Holden Commodore Sedan in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Lip for VP Holden Commodore Sedan - SS Style Polish off the rear end of your VP Commodore with this sleek looking rear bumper bar lip! 100% Australian made Meant to be attached to the bottom of the standard rear bumper bar with urethane & small screws 1 piece design NOTE: VN & VP SS style rear lips are different between the two models and are NOT interchangeable (To see rear lip for VN models, see other listing) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-14% sale

Rear Bumper Bar Lip for VT Holden Commodore Sedan - Manta Style - Spoilers and Bodykits Australia

Rear Bumper Bar Lip for VT Holden Commodore Sedan - Manta Style

$419.00 $485.00

Rear Bumper Bar Lip for VT Holden Commodore Sedan - Manta Style If you're looking for a Rear Bumper Bar Lip for VT Holden Commodore Sedan in Manta Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Lip for VT Holden Commodore Sedan - Manta Style Give the rear end of your Commodore a new sleek look with this rear lip! This lip adds on to lower part of your existing standard rear bumper bar (Use urethane & small screws to attach) NOTE: Will not fit VX models 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-15% sale

Rear Bumper Bar Lip for V35 Nissan Skyline 250GT / 300GT / 350GT Coupe / Sedan

$499.00 $585.00

Rear Bumper Bar Lip for V35 Nissan Skyline 250GT / 300GT / 350GT Coupe / Sedan If you're looking for a Rear Bumper Bar Lip for V35 Nissan Skyline 250GT / 300GT / 350GT Coupe / Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Lip for V35 Nissan Skyline 250GT / 300GT / 350GT Coupe / Sedan Give the rear end of your V35 Skyline a whole new look with this TOUGH looking rear bumper skirt lip! 100% Australian made Custom designed to suit this model Quality fibreglass construction Super strong build quality This product is made to order - Please see above for approx build time Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-7% sale

Rear Bumper Bar Lip for Nissan 180SX - Spoilers and Bodykits Australia

Rear Bumper Bar Lip for Nissan 180SX

$379.00 $405.00

Rear Bumper Bar Lip for Nissan 180SX If you're looking for a Rear Bumper Bar Lip for Nissan 180SX then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Lip for Nissan 180SX Give the rear end of your 180SX a whole new look with this TOUGH looking rear bumper skirt lip! 100% Australian made 3 pieces - 1x centre piece and 2x outer side pods Custom designed to suit this model Quality fibreglass construction Super strong build quality This product is made to order - Please see above for approx build time Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-11% sale

Rear Bumper Bar Diffuser for Toyota 86 / Subaru BRZ (2013 - 2016 Models) - Spoilers and Bodykits Australia

Rear Bumper Bar Diffuser for Toyota 86 / Subaru BRZ (2013 - 2016 Models)

$299.00 $335.00

Rear Diffuser for Toyota 86 / Subaru BRZ (2013 - 2016 Models) If you're looking for a Rear Diffuser for Toyota 86 / Subaru BRZ then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Diffuser for Toyota 86 / Subaru BRZ (2013 - 2016 Models) Super tough high quality Polyurethane construction Flat matt black in colour (Can be painted or left as is) Meant to be attached to the base of the original rear bumper Supplied with screws for fitment (You will need to drill holes to fit it) (Not supplied with instructions) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-15% sale

Rear Bumper Bar Diffuser for Subaru Impreza WRX STI Sedan (2001 - 2005 Models)

$399.00 $465.00

Rear Bumper Bar Diffuser for Subaru Impreza WRX STI Sedan (2001 - 2005 Models) If you're looking for a 100% Australian made Rear Bumper Bar Diffuser for Subaru Impreza WRX STI Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bumper Bar Diffuser for Subaru Impreza WRX STI Sedan (2001 - 2005 Models) Give your Subaru a whole new look with this TOUGH looking rear diffuser! 100% Australian made This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-15% sale

Rear Bumper Bar Lip for VT Holden Commodore Sedan - SS Style

$399.00 $465.00

Rear Lip for VT Holden Commodore Sedan - SS Style If you're looking for a Rear Lip for VT Holden Commodore Sedan in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Lip for VT Holden Commodore Sedan - SS Style Give the rear end of your Commodore a new sleek look with this rear lip! This lip adds on to lower part of your existing standard rear bumper bar (Use urethane & small screws to attach). Will NOT fit VX models 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-9% sale

Rear Bumper Bar Pods for Subaru WRX STI (2015 - 2017 Models)

$279.00 $305.00

Rear Pods for Subaru WRX STI (2015 - 2017 Models) If you're looking for Rear Pods for Subaru WRX STI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Pods for Subaru WRX STI (2015 - 2017 Models) These rear pods attach to the bottom of your stock rear bumper Supplied as a pair Super tough Poly-Urethane construction Matt black in colour This part can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-9% sale

Rear Bumper Bar Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models)

$279.00 $305.00

Rear Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models) If you're looking for a pair of Rear Pods for Subaru BRZ / Toyota 86 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models) These rear pods attach to the bottom of your standard rear bumper bar Supplied as a pair Super tough Poly-Urethane construction Matt black in colour These can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-10% sale

Rear Lip for Mazda MX5 NA - RS Style (1990 - 1997 Models)

$349.00 $385.00

Rear Lip for Mazda MX5 NA - RS Style (1990 - 1997 Models) If you're looking for a Rear Lip for Mazda MX5 NA in RS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Rear Lip for Mazda MX5 NA - RS Style (1990 - 1997 Models) This lip attaches to the bottom of your stock rear bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

1 2

Huge Range of Awesome Gear

Shipping Aus-Wide

Easy 30 Day Returns

Awesome Customer Service

Ph: 1300 362 376

Mon-Fri (9am-5pm)

Email: sales@spoilersandbodykits.com.au

COLLECTIONS Roof Spoilers Weather Shields Bonnet Scoops Head Light Eyebrows All Lights Large Boot Spoilers Front Grills Bonnet Protectors Flares Bonnets Vents

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook