Front Bumper Lips

If you're looking for a front bumper bar lip for your vehicle then you've come to the right place. Spoilers And Bodykits has a large range of add on front lips to pump out the look of your vehicle and really give it the look you're after. From Ford, Holden, Mitsubishi, Nissan, Toyota and many more, we've got you covered, take a look at the full range below!

Read

-4% sale

Front Bumper Bar Lip for BA XR Ford Falcon - DJR Style - Spoilers and Bodykits Australia

Front Bumper Bar Lip for BA XR Ford Falcon - DJR Style

$419.00 $435.00

Front Lip for BA XR Ford Falcon - DJR Style *** This front lip only fits the BA XR Falcon front bumper bar (Will NOT fit a BF Bumper) *** If you're looking for a Front Lip for BA XR Ford Falcon in DJR style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for BA XR Ford Falcon - DJR Style Give the front end of your BA Falcon a whole new CHUNKIER look with this tough looking front lip! 100% Australian made Meant to be attached to the bottom of the BA XR front bumper bar ONLY with urethane & small screws (Will not fit a BF Bumper) 3 piece design This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-12% sale

Front Bumper Bar Lower Lip Spoiler for Lexus IS200 / IS300 (1999 - 2005 Models) - Spoilers and Bodykits Australia

Front Bumper Bar Lower Lip Spoiler for Lexus IS200 / IS300 (1999 - 2005 Models)

$529.00 $595.00

Front Bumper Bar Lower Lip Spoiler for Lexus IS200 / IS300 (1999 - 2005 Models) If you're looking for a Front Bumper Bar Lower Lip Spoiler for Lexus IS200 / IS300 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar Lower Lip Spoiler for Lexus IS200 / IS300 (1999 - 2005 Models) Give the front end of your Lexus a whole new look with this TOUGH looking lower front lip spoiler! 100% Australian made Meant to be attached to the bottom of the standard front bumper bar Has air vent duct as shown in images (You can hook up tubing behind these air vents to help cool down your brakes) Custom designed to suit this model Quality fibreglass construction Super strong build quality This product is made to order - Please see above for approx build time Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) Note that this is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-9% sale

Front Bumper Bar Lip / Splitter for Honda Civic Sedan FD2 (2008 - 2012 Models) - Spoilers and Bodykits Australia

Front Bumper Bar Lip / Splitter for Honda Civic Sedan FD2 (2008 - 2012 Models)

$279.00 $305.00

Front Bumper Bar Lip / Splitter for Honda Civic Sedan FD2 (2008 - 2012 Models) *** NOTE: IF THE YEAR MODEL OF YOUR CAR IS MADE IN THE BEGINNING OR ENDING YEAR AS WHAT IS LISTED FOR THIS MODEL, THEN CONTACT US BEFORE PURCHASING, AS YOUR CAR MODEL MAY HAVE CHANGED DURING THAT YEAR WHICH MAY MAKE THESE NOT FIT (WE NEED TO KNOW EXACT MONTH & YEAR OF BUILD DATE) *** If you're looking for a Front Bumper Bar Lip / Splitter for Honda Civic Sedan FD2 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Front Bumper Bar Lip / Splitter for Honda Civic Sedan FD2 (2008 - 2012 Models) Give the front end of your Civic a completely new look with this TOUGH looking front bumper lip! Fits factory style front bumpers ONLY on Honda Civic 8th Gen FD2 sedan - VTi / VTi-L / Sport / Limited Edition / Hybrid / 40th Anniversary models Made of high quality PP injection plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass lip (But you can paint it if you want it to match your cars colour) Easy installation - Supplied with fittings Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Out of Stock -10% sale

Front Lip for Volkswagen Golf 5 GTI Votex (2006 - 2009 Models) - Spoilers and Bodykits Australia

Front Lip for Volkswagen Golf 5 GTI Votex (2006 - 2009 Models)

$349.00 $385.00

Front Lip for Volkswagen Golf 5 GTI Votex (2006 - 2009 Models) This Front Lip Fits These Models: Volkswagen Golf GTI MK5 (2006 - 2009 Models) Volkswagen Jetta Sedan - MK5 ONLY (2005 - 2010 Models) Volkswagen Jetta Wagon - MK5 ONLY (2009 - 2010 Models) If you're looking for a Front Lip for Volkswagen Golf 5 GTI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Volkswagen Golf 5 GTI Votex (2006 - 2009 Models) This front lip attaches to the bottom of your Volkswagen Golf MK5 GTI stock front bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-10% sale

Front Lip for Toyota 86 (2013 - 2016 Models) - Spoilers and Bodykits Australia

Front Lip for Toyota 86 (2013 - 2016 Models)

$349.00 $385.00

Front Lip for Toyota 86 (2013 - 2016 Models) If you're looking for a Front Lip for Toyota 86 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Toyota 86 (2013 - 2016 Models) This front lip attaches to the bottom of your standard Toyota 86 front bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-6% sale

Front Bumper Bar Skirt for XR Series 1 AU Ford Falcon - Tickford Style (Sedan, Wagon & Ute)

$419.00 $445.00

Front Skirt for XR Series 1 AU Ford Falcon - Tickford Style (Sedan, Wagon & Ute) If you're looking for 100% Australian made Front Skirt for XR Series 1 AU Ford Falcon - Tickford Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Skirt for XR Series 1 AU Ford Falcon - Tickford Style Give your Falcon a whole new look with this TOUGH looking front bumper bar lip! Fits Sedan, Wagon & Ute models - 9/98 - 3/00 AU Models 100% Australian made Meant to be attached to the bottom of the standard front bumper bar ONLY with urethane & small screws This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-14% sale

Front Lower Bumper Bar Lip Spoiler for XR / XT / XW / XY Ford Falcon - GT Style

$289.00 $335.00

Front Lower Bumper Bar Lip Spoiler for XR / XT / XW / XY Ford Falcon - GT Style If you're looking for a 100% Australian made Front Lower Bumper Bar Lip Spoiler for XR / XT / XW / XY Ford Falcon in GT Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lower Bumper Bar Lip Spoiler for XR / XT / XW / XY Ford Falcon - GT Style Give your Falcon a whole new look with this tough looking front lower spoiler! Made as per the original item with the 'grainy' style finish 3 piece spoiler - 2x outer spoiler pieces & 1x centre block piece that holds the 2 outers together Meant to be mounted with screws 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

-7% sale

Front Bumper Bar Lip Splitter for Toyota 86 - GT Style (2017 - 2019 Models) - Spoilers And Bodykits Australia

Front Bumper Bar Lip / Splitter for Toyota 86 - GT Style (2017 - 2019 Models)

$249.00 $265.00

Front Bumper Bar Lip / Splitter for Toyota 86 - GT Style (2017 - 2019 Models) If you're looking for a Front Bumper Bar Lip / Splitter for Toyota 86 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Front Bumper Bar Lip / Splitter for Toyota 86 - GT Style (2017 - 2019 Models) Give the front end of your Toyota 86 a completely new look with this TOUGH looking front bumper lip! Fits only 2017-2019 Toyota 86 GT / GTS / GTS Apollo Blue model bumpers Made of high quality plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass lip (But you can paint it if you want it to match your cars colour) Easy installation - Beautiful snug fit to the factory front bumper bar Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

-13% sale

Lip Bodykit for VL Holden Commodore Sedan - LE Style - Spoilers and Bodykits Australia

Bodykit for VL Holden Commodore Sedan - LE Style (Full Kit)

$2,279.00 $2,615.00

Bodykit for VL Holden Commodore - LE Style (Full Kit) This Bodykit Includes: Front Lower Lip Rear Lower Lip Side Skirts (Pair) Door Panels x 4 Rear Boot Lip Spoiler If you're looking for a Bodykit for VL Holden Commodore in LE Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Full Bodykit for VL Holden Commodore - LE Style Give your VL a whole new look with this tough looking lip bodykit! Bodykit includes: Front Lip, Rear Lip, Side Skirts (Pair), Door Panels x 4 & Rear Boot Lip Spoiler Front and rear lips are meant to be attached to lower area of original front bar & rear bar with urethane & small screws Rear boot lip spoiler comes with fittings Door panels meant to be attached to doors with urethane & side skirts meant to be attached with urethane and small screws 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-12% sale

Lower Front Bumper Skirt / Lip for VL Holden Commodore - Walkinshaw Style - Spoilers and Bodykits Australia

Lower Front Bumper Skirt / Lip for VL Holden Commodore - Walkinshaw Style

$429.00 $485.00

Lower Front Bumper Skirt / Lip for VL Holden Commodore - Walkinshaw Style If you're looking for a Lower Front Bumper Skirt / Lip for VL Holden Commodore - Walkinshaw Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Lower Front Bumper Skirt / Lip for VL Holden Commodore - Walkinshaw Style Give the front end of your VL a whole new look with this front lower lip! 100% Australian made As per original parts Meant to be screwed to the upper bumper bar This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Out of Stock -14% sale

Front Bumper Bar Pods for CJ Mitsubishi Lancer - VRX Style (Sedan & Hatch Sports Wagon Only)

$289.00 $335.00

Front Pods for CJ Mitsubishi Lancer - VRX Style (Sedan & Hatch Sports Wagon Only) Suits these Build dates: Sedans- 9-2007 to 2014 Hatch 2008 to 2014 If you're looking for Front Pods for CJ Mitsubishi Lancer VRX Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Pods for CJ Mitsubishi Lancer VRX Style Give the front end of your Lancer a more aggressive look with these great looking front bumper bar pods! Suits build dates: Sedans: 9/2007 to 2014 & Hatch 2008 to 2014 Only Fits CJ Sedans and Sports Wagon Hatch Supplied as a pair Meant to be attached to the bottom outer areas of your standard front bumper bar with urethane & small screws 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Out of Stock -10% sale

Front Lip for JZA80 Toyota Supra - V2 Style (1993 - 1998 Models) - Spoilers and Bodykits Australia

Front Lip for JZA80 Toyota Supra - V2 Style (1993 - 1998 Models)

$439.00 $485.00

Front Lip for JZA80 Toyota Supra - V2 Style (1993 - 1998 Models) If you're looking for a Front Lip in V2 Style for JZA80 Toyota Supra then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for JZA80 Toyota Supra - V2 Style (1993 - 1998 Models) This front lip attaches to the bottom of your standard Toyota Supra JZA80 front bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-12% sale

Front Lip for Subaru WRX Impreza STI - Widebody (2011 - 2014 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru WRX Impreza STI - Widebody (2011 - 2014 Models)

$349.00 $395.00

Front Lip for Subaru WRX Impreza STI - Widebody (2011 - 2014 Models) If you're looking for a Front Lip for Subaru WRX Impreza STI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Subaru WRX Impreza STI - Widebody (2011 - 2014 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-11% sale

Front Lip for Mitsubishi Lancer EVO 9 - RALLIART Style (2006 - 2007 Models)

$389.00 $435.00

Front Lip for Mitsubishi Lancer EVO 9 - RALLIART Style (2006 - 2007 Models) If you're looking for a Front Lip for Mitsubishi Lancer EVO 9 in RALLIART Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Mitsubishi Lancer EVO 9 - RALLIART Style (2006 - 2007 Models) This front lip attaches to the bottom of your original front bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-10% sale

Front Lip for Mazda MX5 NB2 - GV Style (2001 - 2005 Coupe/Convertible Models) - Spoilers and Bodykits Australia

Front Lip for Mazda MX5 NB2 Coupe / Convertible - GV Style (2001 - 2005 Models)

$359.00 $395.00

Front Lip for Mazda MX5 NB2 Coupe / Convertible - GV Style (2001 - 2005 Models) If you're looking for a Front Lip for Mazda MX5 NB2 Coupe / Convertible then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Mazda MX5 NB2 Coupe / Convertible - GV Style (2001 - 2005 Models) This front lip attaches to the bottom of your stock front bumper bar on all MX5 NB2 2001 - 2005 Model Coupe & Convertibles Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-13% sale

Gloss Black Front Bumper Lip & Carbon Fibre Splitters for BMW M3 F80 / M4 F82 / F83 (2014 - 2019) - Spoilers and Bodykits Australia

Gloss Black Front Bumper Lip & Carbon Fibre Splitters for BMW M3 F80 / M4 F82 / F83 (2014 - 2019)

$859.00 $985.00

Gloss Black Front Bumper Lip & Carbon Fibre Splitters for BMW M3 F80 / M4 F82 / F83 (2014 - 2019) If you're looking for a Gloss Black Front Bumper Lip & Carbon Fibre Splitters for BMW M3 F80 / M4 F82 / F83 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Gloss Black Front Bumper Lip & Carbon Fibre Splitters for BMW M3 F80 / M4 F82 / F83 (2014 - 2019) Give the front of your car a whole new look with this TOUGH looking lower lip! Fits these models:BMW M3 F80 (2014 - 2018)BMW M4 F88 / F83 (2014 - 2019) Front lip is made of strong, high quality gloss black ABS plastic Front splitters are made of high quality real carbon fibre with fibreglass reinforced plastic & coated in a clear glossy anti-UV durable finish Easy fitment - Meant to be attached to the bottom of the standard front bumper with urethane & small screws (drilling required) Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish Custom designed to suit this model Tough look plus increases your cars value Shipping Australia Wide Scroll up and Order NOW

-20% sale

Front Bumper Bar Lower Lip Skirt for EF / EL XR Ford Falcon - EF Tickford Style

$399.00 $495.00

Front Bumper Bar Lower Lip Skirt for EF / EL XR Ford Falcon - EF Tickford Style If you're looking for 100% Australian made Front Bumper Bar Lower Lip Skirt for EF / EL XR Ford Falcon in EF Tickford Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar Lower Lip Skirt for EF / EL XR Ford Falcon - EF Tickford Style Give your Falcon a whole new look with this TOUGH looking front bumper bar lip! 100% Australian made Meant to be attached to the bottom of your front bar with urethane & small screws This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-16% sale

Front Lower Bumper Lip for Honda Integra DC2 DC4 (1998 - 2001 Models) - Spoilers And Bodykits Australia

Front Lower Bumper Lip for Honda Integra DC2 / DC4 (1998 - 2001 Models)

$259.00 $305.00

Front Lower Bumper Lip for Honda Integra DC2 / DC4 (1998 - 2001 Models) If you're looking for a Front Lower Bumper Lip for Honda Integra DC2 / DC4 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Front Lower Bumper Lip for Honda Integra DC2 / DC4 (1998 - 2001 Models) Give the front of your Integra a whole new look with this TOUGH looking lower lip! Fits 1998-2001 Honda Integra DC2 / DC4 Coupe models Made of high quality ABS plastic Easy fitment - Meant to be attached to the bottom of the standard front bumper with urethane (Not supplied) & small screws (Supplied) Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish Custom designed to suit this model Tough look plus increases your cars value Shipping Australia Wide Scroll up and Order NOW

-15% sale

Front Bumper Bar Lower Lip Spoiler for Honda Civic Type R EP3 (Pre-Facelift) - Spoilers and Bodykits Australia

Front Bumper Bar Lower Lip Spoiler for Honda Civic Type R EP3 (Pre-Facelift)

$569.00 $665.00

Front Bumper Bar Lower Lip Spoiler for Honda Civic Type R EP3 (Pre-Facelift) If you're looking for a Front Bumper Bar Lower Lip Spoiler for Honda Civic Type R EP3 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar Lower Lip Spoiler for Honda Civic Type R EP3 (Pre-Facelift) Give the front end of your Honda a whole new look with this TOUGH looking lower front lip spoiler! 100% Australian made Meant to be attached to the bottom of the standard front bumper bar Has full undertray & air duct as shown in images (You can hook up tubing behind these air vents to help cool down your brakes) Custom designed to suit this model Quality fibreglass construction Super strong build quality This product is made to order - Please see above for approx build time Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) Note that this is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-19% sale

Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch (1992 - 1995 Models) - Spoilers and Bodykits Australia

Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch (1992 - 1995 Models)

$199.00 $245.00

Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch (1992 - 1995 Models) If you're looking for a Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch (1992 - 1995 Models) Give the front end of your Civic a completely new look with this TOUGH looking front bumper lip! Fits factory style front bumpers ONLY on Honda Civic EG Hatch 92-95 models Made of high quality injection plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass lip (But you can paint it if you want it to match your cars colour) Easy installation - Supplied with fittings Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart Now

-4% sale

Front Bumper Lip Spoiler for VT Holden Commodore - Manta Style - Spoilers and Bodykits Australia

Front Bumper Bar Lip Spoiler for VT Holden Commodore - Manta Style

$419.00 $435.00

Front Bumper Bar Lip Spoiler for VT Holden Commodore - Manta Style If you're looking for 100% Australian made Front Bumper Bar Lip Spoiler for VT Holden Commodore in Manta Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar Lip Spoiler for VT Holden Commodore - Manta Style Give the front end of your VT a whole new look with this TOUGH front skirt lip! 100% Australian made Meant to be attached to the bottom of the standard front bumper bar ONLY with urethane & small screws - Fits all standard VT model bumpers (Will NOT fit VX models) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-13% sale

Front Lower Spoiler / Air Dam for Datsun 1600

$399.00 $455.00

Front Lower Spoiler / Air Dam for Datsun 1600 If you're looking for 100% Australian made Front Lower Spoiler / Air Dam for Datsun 1600 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lower Spoiler / Air Dam for Datsun 1600 100% Australian made Fits all Datsun 1600's This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-12% sale

Front Lip for Subaru WRX Impreza - Narrowbody (Non STI) (2008 - 2010 Models)

$349.00 $395.00

Front Lip for Subaru WRX Impreza - Narrowbody (Non STI) (2008 - 2010 Models) If you're looking for a Front Lip for Subaru WRX Impreza then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Subaru WRX Impreza - Narrowbody (Non STI) - (2008 - 2010 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-7% sale

Front Lip for Subaru WRX GC8 - STI Type 2 Style (1998 - 2000 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru WRX GC8 - STI Type 2 Style (1998 - 2000 Models)

$379.00 $405.00

Front Lip for Subaru WRX GC8 - STI Type 2 Style (1998 - 2000 Models) If you're looking for a Front Lip for Subaru WRX GC8 - STI Type 2 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru WRX GC8 - STI Type 2 Style (1998 - 2000 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

1 2 3 4

Huge Range of Awesome Gear

Shipping Aus-Wide

Easy 30 Day Returns

Awesome Customer Service

Ph: 1300 362 376

Mon-Fri (9am-5pm)

Email: sales@spoilersandbodykits.com.au

COLLECTIONS Roof Spoilers Weather Shields Bonnet Scoops Head Light Eyebrows All Lights Large Boot Spoilers Front Grills Bonnet Protectors Flares Bonnets Vents

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook