Products – Page 346 – Spoilers and Bodykits

Rear Bumper Bar Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models)

$279.00 $305.00

Rear Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models) If you're looking for a pair of Rear Pods for Subaru BRZ / Toyota 86 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Pods for Subaru BRZ / Toyota 86 (2013 - 2018 Models) These rear pods attach to the bottom of your standard rear bumper bar Supplied as a pair Super tough Poly-Urethane construction Matt black in colour These can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

Out of Stock -9% sale

Front Lip for Subaru BRZ - STI Style (2013 - 2016 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru BRZ - STI Style (2013 - 2016 Models)

$389.00 $425.00

Front Lip for Subaru BRZ - STI Style (2013 - 2016 Models) If you're looking for a Front Lip for Subaru BRZ in STI Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru BRZ - STI Style (2013 - 2016 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-6% sale

Side Skirts for Subaru WRX STI (2008 - 2014 Models) - Spoilers and Bodykits Australia

Side Skirts for Subaru WRX STI (2008 - 2014 Models)

$479.00 $505.00

Side Skirts for Subaru WRX STI (2008 - 2014 Models) If you're looking for Side Skirts for Subaru WRX STI then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Side Skirts for Subaru WRX STI (2008 - 2014 Models) These side skirts attach to the bottom of your stock side bumper Supplied as a pair Super tough Poly-Urethane construction Matt black in colour These can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-7% sale

Front Lip for Subaru WRX Peanut Eye - STI Style (2003 - 2005 Models)

$379.00 $405.00

Front Lip for Subaru WRX Peanut Eye - STI Style (2003 - 2005 Models) If you're looking for a Front Lip for Subaru WRX Peanut Eye then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru WRX Peanut Eye - STI Style (2003 - 2005 Models) This front lip attaches to the bottom of your stock front bumper bar Fits 2003 - 2005: WRX, STI, RS & Impreza Models Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-7% sale

Front Lip for Subaru WRX Bugeye - STI Style (2001 - 2002 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru WRX Bugeye - STI Style (2001 - 2002 Models)

$379.00 $405.00

Front Lip for Subaru WRX Bugeye - STI Style (2001 - 2002 Models) If you're looking for a Front Lip for Subaru WRX Bugeye then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru WRX Bugeye - STI Style (2001 - 2002 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

Out of Stock -10% sale

Front Lip for Mazda MX5 NB1 - GV Style (1999 - 2000 Models) - Spoilers and Bodykits Australia

Front Lip for Mazda MX5 NB1 - GV Style (1999 - 2000 Models)

$359.00 $395.00

Front Lip for Mazda MX5 NB1 - GV Style (1999 - 2000 Models) If you're looking for a Front Lip for Mazda MX5 NB1 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Mazda MX5 NB1 - GV Style (1999 - 2000 Models) This front lip attaches to the bottom of your stock front bar on all MX5 NB1 1999 - 2000 models Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-10% sale

Rear Lip for Mazda MX5 NA - RS Style (1990 - 1997 Models)

$349.00 $385.00

Rear Lip for Mazda MX5 NA - RS Style (1990 - 1997 Models) If you're looking for a Rear Lip for Mazda MX5 NA in RS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Rear Lip for Mazda MX5 NA - RS Style (1990 - 1997 Models) This lip attaches to the bottom of your stock rear bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-14% sale

Front Lip for Honda Integra DC5 - STI Style - Spoilers and Bodykits Australia

Front Lip for Honda Integra DC5 - STI Style

$289.00 $335.00

Front Lip for Honda Integra DC5 - STI Style *** NOTE: This front lip needs slight trimming of edges to fit the Honda Integra DC5 *** If you're looking for a Front Lip for Honda Integra DC5 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Honda Integra DC5 - STI Style Super tough Polypropylene construction Matt black in colour Front lip can be painted or left as is (Comes unpainted) Supplied with all screws needed to fit NOTE: This front lip needs slight trimming of edges to fit the Honda Integra DC5 Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-7% sale

Cold Air Intake MAF Kit to suit VF V8 6.0 & 6.2L Engines - Spoilers and Bodykits Australia

Cold Air Intake MAF Kit to suit VF V8 6.0 & 6.2L Engines

$769.00 $825.00

Cold Air Intake MAF Kit to suit VF V8 6.0 & 6.2L Engines >>> The VF Holden owner’s most popular choice when it comes to Over The Radiator Cold Air Intakes <<< If you're looking for a Cold Air Intake MAF Kit to suit VF V8 6.0 & 6.2L Engines then this is the one for you. More POWER, Increased PERFORMANCE & Better ECONOMY is what is achieved by installing one of these V6 Orssom Performance Cold Air Intakes. Suits all Holden VE SS and SSV V8 Commodores including the Holden HSV variants fitted with the 6.0 and 6.2 litre LS2 and LS3 engines, L76 – L77 – L98. Here's what you get in this Cold Air Intake Kit: Top Intake Cover Lower Filter Housing K&N Air Filter re-washable ( Part No 33-2640 ) 1 Airflow Meter Seal 1 x Rubber Bellow 1 x Hose Clamp 3 x Speed Clips 3 x Phillips Head Screws 1 x 10mm Length Vacuum Breather Hose 1 x Right Angle Breather Pipe ( Optional use on some models Only ) Fitting Instructions And the great thing about these Cold Air Intakes are: NO laying back of radiator to fit the intake NO cutting or lengthening of any electrical wires NO cutting of any body panels to fit intake NO removing bumper bars to clean or replace air filters MAF fitment, (Must be fitted with the factory Air Flow Meter) Can be installed in about 30 minutes 12 months Manufacturers Replacement Warranty from purchase date, against faulty manufacturing (Failure to follow fitting instructions procedure will void warranty). You and your pride and joy are going to love the: Cooler air intake temperatures Increased air flow to your engine Increase in power and torque Excellent throttle response Improvement to your fuel economy Awesome induction sound OEM style for that stealth under bonnet appearance *** This kit does not include the Airflow Sensor, you MUST use your original factory unit *** Disclaimer: Orssom Performance Products are designed for off road use only. CAI Pty LTD & Conrod Motorsport Pty Ltd T/A Orssom Performance, accept no responsibility nor will be held liable for any damages caused to Vehicle engines / Vehicles / Property / Lose of life / Injury or Injury to others, as a result of fitment of these products. Please consider carefully if this product is for you before purchasing. Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-30% sale

Front Lower Bumper Bar Pods for Suzuki Swift - Pair (2011 - 2017)

$329.00 $465.00

Front Lower Bumper Bar Pods for Suzuki Swift - Pair (2011 - 2017) If you're after an Australian made Front Lower Bumper Bar Pods for Suzuki Swift, this is the perfect choice. Designed with a tough, durable construction, it not only enhances protection but also gives your car a bold aftermarket look and style. Front Lower Bumper Bar Pods for Suzuki Swift - Pair (2011 - 2017) Give the front end of your Swift a more aggressive look with these front bumper bar pods Fits ONLY 2011 - 2017 Suzuki Swift models 100% Australian made Supplied as a pair (Also available separately) Meant to be attached to the bottom of the standard front bumper bar using urethane & small screws This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart Now

344 345 346

Huge Range of Awesome Gear

Shipping Aus-Wide

Easy 30 Day Returns

Awesome Customer Service

Ph: 1300 362 376

Mon-Fri (9am-5pm)

Email: sales@spoilersandbodykits.com.au

COLLECTIONS Roof Spoilers Weather Shields Bonnet Scoops Head Light Eyebrows All Lights Large Boot Spoilers Front Grills Bonnet Protectors Flares Bonnets Vents

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook